Showing posts with label ADSL Hacking. Show all posts
Showing posts with label ADSL Hacking. Show all posts
Saturday, November 12, 2011
If you are a BSNL broadband user, chances are that you are facing frequent DNS issues. Their DNS servers are just unresponsive. The look up takes a long duration and many times just time out. The solution? There is small hack on BSNL for this. Use third party DNS servers instead of BSNL DNS servers or run your own one like djbdns. The easiest options is to use OpenDNS. Just reconfigure your network to use the following DNS servers:208.67.222.222 or 208.67.220.220
Detailed instructions specific to operating system or your BSNL modem are available in the OpenDNS website itself. After I reconfigured my BSNL modem to use the above 2 IP addresses, my DNS problems just vanished! Other ‘freebies’ that come with OpenDNS are phishing filters and automatic URL correction. Even if your service provider’s DNS servers are working fine, you can still use OpenDNS just for these two special features. After you hack BSNL DNS servers, you will see a noticeable improvement in your broadband speed.
Saturday, November 12, 2011 1
Saturday, April 30, 2011
Almost half of the Internet users across the globe use ADSL routers/modems to connect to the Internet however, most of them are unaware of the fact that it has a serious vulnerability which can easily be exploited even by a noob hacker just like you. In this post I will show you how to exploit a common vulnerability that lies in most ADSL routers so as to gain complete access to the router settings and ISP login details.
Every router comes with a username and password using which it is possible to gain access to the router settings and configure the device. The vulnerability actually lies in the Default username and passwordthat comes with the factory settings. Usually the routers come preconfigured from the Internet Service provider and hence the users do not bother to change the password later. This makes it possible for the attackers to gain unauthorized access and modify the router settings using a common set of default usernames and passwords.
Here is how you can do it.
Before perform this action you need the following tool.
Now follow these Steps :
Step 1. Go to http://www.whatismyip.com/. Once the page is loaded you will find your IP address. Note it down.
Step 2. Open Angry IP Scanner, here you will see an option called IP Range: where you need to enter the range of IP address to scan for.
Step 3. Suppose your IP is 123.237.233.134, you can set the range something as 123.237.232.0 to 123.237.234.255 so that there exists atleast 300-400 IP addresses in the range.
Step 4. Go to Tools->Preferences and select the Ports tab. UnderPort selection enter 80 (we need to scan for port 80). Now switch to the Display tab, select the option “Hosts with open ports only” and click on OK.
Saturday, April 30, 2011 1
Subscribe to:
Posts (Atom)
